Soil Testing Equipment

Approx. Rs 1.35 Lakh / PieceGet Latest Price

• ISI Compression Testing Machine - 2000 kN 

  1. FEATURES

  –Compression testing machine is robust.–Loading Accuracy ± 1%–Simplified design for ease of operation and maintenance.–Highly rigid frame.–Highly stability.–Safety provisions against over load.–Loads are calibrated in kN against certified proving rings.–Operator safety features like glass window are provided.–Self aligning platen with fast accessory change capability.–Peak Load recording.–Vickers hardness –581.–width of bearing block- 27mm.–Maximum diameter of Bottom Bearing Blocks dia 278mm.–Movable portion tilt 5.14 degrees.

  2. INSTALLATION AND COMMISSION PROCEDURE

                The concrete platform of size= 1.25m X 1m is prepared with concrete having mixing ratio cement: sand: aggregate with water cement ratio and the fixing arrangements shall be done for compression testing machine such as bolting or welding rods are placed in concrete Then curing is done for 28 days.

  3. PREPARATION OF PLATFORM

  –Placing of compression testing machine on concrete platform and fixing is done.–Initial setup is carried out such as cleaning
• connection and calibration

Approx. Rs 6,500 / SetGet Latest Price

Test Sieves are used for sieving of aggregate, sand soil and cement etc.

Test Sieves are used for sieving of aggregate, sand soil and cement etc. These sieves are manufactured as per various standards like ISS, BSS, ASTM, DIN etc. Sieves are made of Brass frame and G.I. frame of dia. 200mm, 300mm & 450mm. Normally Brass Sieves are manufactured in 200 cm dia and frame is spun brass, joint less. The Sieve cloth used is standard SS or phosphor bronze wire mesh. Lid and Receiver
made of brass for 20cm or 8” dia sieves

Specifications:

· Manufactured as per various standards such as ISS, BSS, ASTM, DIN etc.

· Sieves are made of Brass frame and G.I. frame of dia 200 mm, 300 mm & 450 mm

· Normally Brass Sieves are manufactured in 200 cm dia and frame is spun brass, joint less

· The Sieve cloth used is standard SS or phosphor bronze wire mesh. Lid and Receiver

· Made of brass for 20 cm or 8” dia sieves

Brass Sieves 200mm Dia which include 10mm , 4.75mm , 2.36mm , 1.18mm , 12.5mm , 600 micr , 300 micr , 150 micr , 20mm , 1mm , 425 micr , pan , lid (Complete set of Sieves)

Additional Information:

Approx. Rs 1,600 / SetGet Latest Price

• Brass Sieves 200mm Dia which includes following

• 10mm
• 4.75mm
• 2.36mm
• 1.18mm
• 12.5mm
• 600 micr
• 300 micr
• 150 micr
• 20mm
• pan
• lid.

Test Sieves are used for sieving of aggregate, sand soil and cement etc.

Test Sieves are used for sieving of aggregate, sand soil and cement etc. These sieves are manufactured as per various standards like ISS, BSS, ASTM, DIN etc. Sieves are made of Brass frame and G.I. frame of dia. 200mm, 300mm & 450mm. Normally Brass Sieves are manufactured in 200 cm dia and frame is spun brass, joint less. The Sieve cloth used is standard SS or phosphor bronze wire mesh. Lid and Receiver
made of brass for 20cm or 8” dia sieves.

Brass sieves include: 90mic & 75mic.

Additional Information:

Approx. Rs 5,500 / SetGet Latest Price

Test Sieves are used for sieving of aggregate, sand soil and cement etc.

Test Sieves are used for sieving of aggregate, sand soil and cement etc. These sieves are manufactured as per various standards like ISS, BSS, ASTM, DIN etc. Sieves are made of Brass frame and G.I. frame of dia. 200mm, 300mm & 450mm. Normally Brass Sieves are manufactured in 200 cm dia and frame is spun brass, joint less. The Sieve cloth used is standard SS or phosphor bronze wire mesh. Lid and Receiver
made of brass for 20cm or 8” dia sieves

Additional Information:

Approx. Rs 1,850 / No(s)Get Latest Price

Approx. Rs 2,400 / No(s)Get Latest Price

Approx. Rs 10,200 / No(s)Get Latest Price

Approx. Rs 46,500 / No(s)Get Latest Price

C.B.R. Apparatus

As per IS: 2720 (Part XVI) The California Bearing Ratio Apparatus consists of :

• Load Frame 50 KN capacity electrical / hand operated.

• Mild Steel or Gun Metal mould 150mm dia x 175mm high.

• Rammer 4.89 Kg & 2.6 Kg.

• Surcharge weights annular & slotted 2.5 Kg.

• Aluminum tripod

• Penetration piston

• Brass perforated plate with stem and lock nut

• Cutting collar and Circular spacer disc with detachable handle

• Proving Ring 25 KN

Approx. Rs 8,100 / No(s)Get Latest Price

Liquid Limit Device 

Approx. Rs 2,100 / No(s)Get Latest Price

HAND OPERATED :

HAND OPERATED: With consists of a brass cup held on an adjustable bracket. The bowl can be adjusted for a fall raised & dropped on a rubber of standard hardness by cam action. Complete with one casagrande grooving tool, one ASTM grooving tools and a height gauge block. Hand operated, with counter. As per IS : 2720 (Part-V), IS : 9259, BS : 1377, AS : 89

RELEVANT STANDARD : IS : 2720 (PART-V)

Approx. Rs 1,400 / No(s)Get Latest Price

Sand Pouring Cylinder

10cm (Small Size):- Sand Replacement Method. Consists of Sand Pouring Cylinder, one calibrating container 10 cm dia & a square tray of 30 cm x 30 cm with a central hole of 10 cm diameter. Relevant Standard : IS : 2720(Part-XXVIII)

SAND REPLACEMENT METHOD: Three sizes Available.

1) 10cm (Small Size)

2) 15cm (Medium Size)

3) 20cm (Large Size) 

Approx. Rs 1,500 / NumberGet Latest Price

Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled into a thread of 3mm. dia.

Salient Features

Specifications: The complete set consists of one each:-

1. Glass plate 20 cm x 115 cm having ground ends and one side frosted.

2. Brass or stainless steel rod 3 mm dia x 150 mm long.

3. Flexible spatula.

4. Set of 6 moisture containers.

5. Porcelaine basin 150 mm dia.

6. Plastic wash bottle 500ml.

Additional Information:

Approx. Rs 800 / No(s)Get Latest Price

This is used for determination of in situ dry density of natural or compacted fine grained soil, free from aggregates. A cylindrical cutter is used to extract a sample of the soil with the help of a dolley and rammer. From the weight, density and the moisture, and dry density of the soil is readily calculated. Specifications :It consists one each of : Cylindrical core cutter made of steel, 127.3 mm long and 100mm internal diameter.

Additional Information:

Approx. Rs 54,000 / NoGet Latest Price

1) SINGLE SPEED

2) TWELVE SPEED

The apparatus comprises of the following :

Loading Unit: Supplied with loading yoke with direct and lever for applying load. Normal stress capacity 8Kg/Sq.cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre calibrated loading. Yoke. The loading unit is provided with V strips and roller strips for frictionless movement of shear box housing.

Consists of loading unit, shear box assembly for 60 mm x 60 mm x 25 mm complete with two halves of loading pad, one base plate. All made of gunmetal with two porous stones. Share box housing of gunmetal, specimen Cutter of steel with set of weight to give normal stress of 3 kg/cm2. Through lever as follows.

To give kg/cm2. Qty.

0.05 - 4Nos.

0.1 - 1No.

0.2 - 1No.

0.5 - 3Nos.

1.0 - 1No.

Multiple reversal type, Motorized, Single speed , electrically operated to give a single constant rate of strain of 1.25mm/min. Suitable for 230v. A.C. Without dial gauge and proving ring. AS PER IS:2720 (PART VIII)

OR

Unit is electrically operated to give the following 12 rates of strains. 1.25, 0.625, 0.125, 0.05, 0.01, 0.005, 0.002, 0.001, 0.0004 and 0.0002mm/min. The apparatus is suitable for operation on 230 volts single phase A.C. supply. Without dial gauge and proving ring.

OPTIONAL ACCESSORIES:

Dial Gauge 0.01 mm x 25 mm travel

High sensitivity proving ring 200 kg. fitted with 0.002 mm dial gauge with our calibration certificate in a case.

Shear box complete with two plain gripper plates, two perforated gripper plates, two porous stones, one top loading pad, one base plate and U-bracket. 60x60x25mm.Made of Gunmetal.

Spare Housing.

Approx. Rs 33,500 / No(s)Get Latest Price

Field CBR apparatus.

It is useful in determining the load carrying capacity in the field when in place density and water contents are such that the degree of saturation is 80% or greater, when material is cohesion less and course grained. Such that it is not effected by changes in water contents and when the material has been in place for considerable time. The loading is effected by means of a mechanical load frames which can be fixed to the under side of a truck.

Specifications: mechanical screw loading jack, 10,000 kg. Capacity with u-bracket and swivel head. Penetration piston, 50mm dia. Threaded at the upper end. Extension rods consisting of 2 lengths 5cm. 2 lengths 10cm, 1 length 30cm, 1 length 50cm and 1 length 100cm, used as spacers between the proving ring and penetration piston. The lengths are machined from steel tubing. Connector set has eight connectors for coupling the penetration piston and proving ring assembly either directly or through extension pieces. Dial gauge support of seamless pipe construction. It stands 30 cm high and 45 cm wide at the base. Provided with a quick release screw type clamp capable of sliding and locking anywhere along 2 meter length of the bridge. Supplied with annular metal weight 5 kg, 250mm dia with 53mm dia central hole, slotted metal weight 5 kg. 215mm to 250mm dia with 53mm dia slot, 2 nos. Slotted metal weights, 10 kg, 215mm to 250mm dia with 53 mm dia slot 2 nos. Dial gauge 0. 01mm x 25mm. High sensitivity proving ring 5000 kg capacity with calibration chart & carrying case.

Approx. Rs 750 / No(s)Get Latest Price

ASTM D 422 AASHTO T 88, BS 1377-2.

Used for grain size analysis of soils where more than 10% of the material will pass through 75 microns B.S. sieve. Manufactured from clear transparent glass having uniform clarity throughout the upper end on which density scale is engraved. The scale range is 0.995 to 1.030 0 density (gms./cc) at 27^oC smallest division on the scale is 0.0005.

NOTE : Hydrometer for other liquids also available.

Approx. Rs 8,200 / NumberGet Latest Price

_A mechanical stirring device in which a suitably mounted induction motor will have a vertical shaft having speed of 6000 to 8000 revolutions per minute when loaded. The shaft will be equipped with a replaceable stirring paddle of either of the types and made of metal. The surface will be of such length that the stirring paddle will operate not less than 20 mm and not more than 35 mm above the bottom of the dispersion cup. The dispersion cup will be supported on a rest and shall have a removable baffle. A special dispersion cup conforming to either of the designs shown in IS 2720 (Part IV) 1985 will be provided to hold the sample while it is dispersed. The stirrer will be free from vibration whilst operation and the base will be made of M.S. of at least size 20 cm X 25 cm with rubber cushions. The container and baffle will be of such material as not be affected by the reagents like sodium Carbonate, Sodium silicate , Sodium Hexametaphosphate etc. The stirrings device will be suitable for operation on 230-250 Volts A C with controller switch for different revolution. It will be provided with 3 core wiring of with off-on switch on side. The dimensions of stirring paddles for stirring apparatus and dispersion cup will be as per IS 2720(Part IV)1985.

Approx. Rs 42,500 / No(s)Get Latest Price

The outfit comprises the following.

1.One loading unit Hand. operated 5000 kg capacity with two rates of travel

2 One Gun metal mould, 100mm dia x 127.3 cm height X 1000 cc volume with base plate & collar

3.One perforated swell plate 100mm dia X 16mm thick

4.One spacer 100mm dia X 12.7mm thick

5.Two porous stone of 100mm dia X 12.7mm thick

6.One load transfer bar

7.One steel ball & one soaking tank, 250mm dia x 210mm high

8.Dial gauge 0.01mm X 25mm travel

9.Proving ring of 2.5 KN capacity with calibration chart and carrying case.

AS PER IS: 2720 (PART )

OPTIONAL ACCESSORIES:

High sensitivity Proving Ring, 250 kg or 500 kg fitted with 0.002 mm dial gauge with certificate in a nice

wooden carrying case.

Dial Gauge 0.01mmx25mm travel

Approx. Rs 260 / PieceGet Latest Price

Approx. Rs 21,000 / NoGet Latest Price

To make process of sieving simpler and quicker, Rotap Sieve Shaker is useful this produces circular shaking of the sieves. At the same time the sieves are tapped. The mechanism for imparting circular action and tapping is oil immersed in a tank and in motorized. The Shake0r can accommodate up to 7 Nos. Sieves of dia 150mm or 200 mm. Suitable operations on 230 volts A.C. Single phase.

Approx. Rs 42,000 / No(s)Get Latest Price

C.B.R. Apparatus

As per IS: 2720 (Part XVI) The California Bearing Ratio Apparatus consists of :

• Load Frame 50 KN capacity electrical / hand operated.

• Mild Steel or Gun Metal mould 150mm dia x 175mm high.

• Rammer 4.89 Kg & 2.6 Kg.

• Surcharge weights annular & slotted 2.5 Kg.

• Aluminum tripod

• Penetration piston

• Brass perforated plate with stem and lock nut

• Cutting collar and Circular spacer disc with detachable handle

• Proving Ring 25 KN

Approx. Rs 2,850 / No(s)Get Latest Price

Sand Pouring Cylinder- 15cm

15cm (Medium Size): Sand Replacement Method. Consisting of Sand Pouring Cylinder container metal tray hole in the centre.

Approx. Rs 3,980 / No(s)Get Latest Price

Sand Pouring Cylinder 20cm

20cm (Large Size): Sand Replacement Method. With calibrating container of 250mm internal depth, one metal tray 450 mm square and 50 mm deep with a 200 mm dia hole in the centre.