Concrete Testing Equipment

Specificaton:

Made of Cast Iron / Mild Steel. The mould are made of 4 plates assembled together. Each mould is supplied complete with base plate. Faces are machined flat to ± 0.2mm. And finished in size to 0.2mm.

Available Size:

For testing concrete cylinders for compressive strength tests. 

Specification :

The moulds is split vertically into two parts. The mean internal diameter in within +/-0.2mm and height is within +/-1mm. The ends are machined to +/-0.05. The base plate and top plate are machined flat to +/-0.03mm.

Available Size:

Mould cylinder, cast iron, 15cm dia x 30cm height.

Mould cylinder, cast iron, 16cm dia x 32cm height.

Mould cylinder, cast iron, 10cm dia x 20cm height.

Mould cylinder, cast iron, 30cm dia x 60cm height.

We are manufacturing of cube mould. 

Specification:

Compression Testing Machine 1000KN (100 Tons) Capacity (Economy Channel Model) Hand Operated fitted with 15 cm dia load gauge. Designed for testing of Cement, Concrete Moulds of Various sizes 15cm x 15cm x cubes, 10cm x 10cm x cubes, 7.06 cm x 7.06 cm cubes, 15cm x 30cm cylindrical mould, bricks can also be tested by the help of adjustable hand wheel.

The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The unit is compact, making it useful for site and Laboratory applications. The digital machines are provided with a pace rate controller, to enable maintain a constant of loading.

Features

• High stability four column load frame
• Each frame tested for stability and alignment to avoid tension failure during a test and to ensure centre loading
• Standard Platens for 3 X 6”/ 4 X 8” and 6 X 12” cylinders included.
• A precise large diameter spherical upper platen for optimum results
• Variety of optional accessories for cubes, blocks, bricks and flexure test available
• Motorized hydraulic power pack or pumping unit with rapid approach and automatic over load protection 
• Comes standard with safety Guards on all four sides.

Features

• Provided with aluminum telescopic tripod stand.
• They are rigidly constructed and ensure accuracy for years under severe conditions.
• Available in various types of models.
• They are provided with durable Lithium battery that is good for many operations.
• They can be set up very easily.
• Includes hard-shell carrying case with dual latches, plumb bob, Allen wrench, adjusting pin, and instruction manual.
• Ensures accurate leveling.
• The equipment has easy adjusting features.
• They are portable. 

Used to determine the amount of water required to produce a cement paste of standard consistency and the setting time. The time it takes for a cement to stiffen to a standard value after addition of water is commonly known as the set time. The test involves mixing cement with water and then measuring its resistance to penetration of a standard probe at varying intervals of time, until a certain value is reached.

Technical Specification:

Sieve Shaker Motorised:   :: ¼ h.p. Motor Compton for 220/230V A.C. supply.

:: Timer 0-60minutes is provided in the circuit.

:: Rotation of sieve stage 12 per minute.

:: Simultaneous tapping 500per minute.

:: Oil bath for machine parts.

:: Oil level indicator.

The Vibrating Table is used for compacting concrete cubes and cylinders.

Specifications: It is designed to carry a load of 140 kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking off the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the frequency to be varied between a maximum of 3600 vibrations per minute. A speed regulation handle is provided for increasing or decreasing the frequency. A switch is provided for starting the motor, suitable for operation on 440 volts, 3 phase, 50 cycles, A.C.supply.

Double walled construction inner chamber made of Mild Steel / St Steel and exterior G.I. sheets powder Coated. The gap between the two walls filled with glass wool insulation.

 Temperature controller by Electronic digital Temp controller cum indicator.

 Supplied with G.I Wire mesh shelves.

Temperature Range 50°C to 250°C accuracy ±2°C